GD Series High Performance Stamping Press

Square slide bearing for crank link; Long slide orientation length; Large distributing distance of die heigh adjustment nuts.

High Performance Stamping Press

High Speed Press

Motor rotor & stator press line

The main advantages and characteristics:

National patent technology of crankshaft and square bearing mechanism,two up and down group of,more than 1000mm long roll oriented guide device,four screw micro-adjustment of shut height,which guarantee high orientation guide precision,bottom position precision and "Zero"general clearance.Four hydraulic cylinder lifting device for slide lifting up for convenient inspection,replacement and maintenance.Under advanced structure and characteristic,much smaller motor is designde for 25% energy saved compared to competitor's similar model,thus the cost is reduced greatly.

 

Modol		Units	GD200	GD300	GD63	GD125
Capacity		KN	2000	3000	630	1250
Stroke of Slide		MM	30	30	30	30
Limit of capacity		MM	3	3	3	3
Strokes per minute		S.P.M	160-350	160-350	150-400	150-400
Die height		MM	370-450	400-480	320-380	350-410
Min slide lifting height		MM	100	150	80	100
Bed Area		MM	1700×950×200	2000×950×200	950×600×120	1300×650×150
Scrap an loading area		MM	1450×250	1700×350	680×120	1100×150
Slide bottom area		MM	1470×700	2000×800	762×530	1315×600
T-groove	X	MM	50	50	32	50
	Y	MM	45	45	33	45
	Z	MM	28	28	18	28
	V	MM	22	22	15	22
Total power		KM	22/30	30/37	11	18.5
Working air pressure		(kgf/cm2)/(m3/min)	5.5-7.5kgf/cm2\0.4m3/min
Hydraulic working pressure		Mpa	12.5	12	13.5	15.5
Total weight		±2Ton	35	40	12	20

Note: Notification will come out if there is some change in parameter.

GD Series High Performance Stamping Press